Onkyo TX-8220
Onkyo TX-8220
Onkyo TX-8220

Onkyo TX-8220: Powerful and dynamic stereo receiver

The Onkyo TX-8220 is mounted on an anti-resonance chassis and has an aluminum front panel. The stereo receiver uses a proprietary volume control circuit, Optimum Gain Volume Circuitry, which, unlike traditional solutions, does not introduce interference or distortion into the signal, and ensures a smooth change in signal level. The device is equipped with a built-in DAC based on the PCM1754 chip with parameters of 24 bit / 192 kHz and has optical and coaxial inputs. In addition, the receiver provides inputs for four line sources and an MM pickup.

Another signal source in the stereo receiver is an AM/FM tuner with 40 fixed settings and excellent selectivity, providing very good sound quality even in congested air conditions in megacities. And as an alternative connection option, you can use a Bluetooth receiver.

Onkyo TX-8220 1.jpg

Onkyo TX-8220 power amplifiers are made using proprietary WRAT technology, providing a wide range of operating frequencies and minimal sound distortion at any volume. The output stages are built on discrete transistors. The device is designed to connect two pairs of speakers, which makes it possible to build a multiroom system on its basis. You can also connect an active subwoofer to the stereo receiver, which will add punch to the sound when building an audio system in a large room. The Onkyo TX-8220 power supply is built around a massive custom shielded transformer and high-capacity filter capacitors.

Onkyo TX-8220 5.jpg

The Onkyo TX-8220 stereo receiver resembles AV devices in appearance, but is a two-channel device. The device is equipped with a large informative display, to the right of which there is a volume control, and at the bottom – auxiliary controls. The stereo receiver has a wide range of inputs and is capable of confidently driving even large floor-standing speakers. The stereo receiver provides powerful and dynamic sounds and confidently copes even with large floor-standing speakers. This is a very good choice for creating a universal audio system designed to play music of various genres.

Onkyo TX-8220 Specifications

Output power 100 W per channel (6 ohms, 20 Hz – 20 kHz, THD 0.08%)
Harmonic distortion + noise 0.08% (20 Hz – 20 kHz, half power)
Input sensitivity/impedance 450 mV/40 kOhm (linear), 10 mV (Phono)
Frequency range 10 Hz – 100 kHz (+ 1 dB, – 3 dB, Direct mode)
Voices ± 12 dB, 100 Hz (LF), ± 12 dB, 10 kHz ( HF)
Signal-to-noise ratio 100 dB (line input), 93 dB (Phono)
Speaker impedance 6 – 16 Ohms
Tuner FM 87.5 MHz – 108 MHz
Tuner AM 522 kHz – 1611 kHz; 530 kHz – 1710 kHz
Number of memory presets 40
DAC PCM1754 (24 bit/192 kHz)
Support Bluetooth version 4.1 + EDR (A2DP v1.2, AVRCP v1.3) with Auto Connect technology
Direct Mode yes
Phono inputs, 4 line, optical , coaxial
Outputs Pre-out, subwoofer, 6.3 mm headphone jack
Other switching jack for AM and FM antennas, ground
terminal Output terminals for speakers 5 pairs of screw terminals
Power supply HCPS, high-current transformer
Dimensions (WxHxD) 435x149x328 mm
Weight 6 .8 kg