Vincent CD-200
Vincent CD-200
Vincent CD-200

Vincent CD-200: Classic player that guarantees excellent reading of CDs

Vincent’s Tube line line of compact devices has been expanded with the CD-200 CD player, made in the “midi” form factor. The transport mechanism uses the time-tested Sanyo DA11 in combination with a Philips servo drive, and proprietary software guarantees excellent reading of CDs.

vincent-cd-200-cd-player-front.jpg

The digital signal is converted to analog via a Burr-Brown PCM1796 D/A chip, and the analog signal is then processed using two 6N1 tubes, with each channel using independent filtering, amplification and buffering.

A stable power supply is very important for a CD player, it contributes to the formation of a dynamic and open sound, so the transformer has two independent windings – to power the digital and analog parts.

CD-200_back.jpg

The Vincent CD-200 player can be connected to a modern amplifier either via RCA analog outputs or via optical or coaxial digital outputs. Included in the package is a high quality aluminum remote control that can also be used to control the Vincent SV-200 amplifier. The model is available in 2 finishes – black and silver.

Vincent CD-200 Specifications

DAC: 24bit/192kHz
Transmission: 20Hz – 20kHz (+/- 1dB)
THD: <0.005%
Signal to Noise Ratio: >93dB
Dynamic Range: >100dB
Audio Output Voltage: 2 .5V
Channel Separation: >80dB
Headphone Output Impedance: 100 ohms
Headphone Output: 160 mW (300 ohms)
Maximum Power Consumption: 25 W
Inputs: 1 x 6.3mm headphone jack, 1 x 3.5mm jack (Power Control)
Outputs: 1 x stereo RCA, 1 x optical, 1 x coaxial, 1 x 3.5 mm jack (power control)
Lamp: 2 x 6N1
Dimensions (WxHxD): 210x95x305 mm
Weight: 4 kg