The Canton Smart Sounddeck 100 gen 2 networked soundbar offers the most advanced connectivity options: HDMI, Bluetooth, WiFi, Airplay. Powerful, crystal clear sound with deep bass, thanks to original Canton technologies. Premium quality, can be wall mounted.
Smart series components have a unique functional feature: the ability to be combined into groups! For example, a Smart series soundbar can work wirelessly with two Smart Soundbox 3 systems acting as rear speakers, as well as with a Smart Sub 8 wireless subwoofer. You can also use High-End Smart Vento systems as front and other home theater speakers , thus assembling a completely wireless premium home theater.
Watch your favorite movies, sports programs, concerts and video games with the new multi-zone soundbar Canton Smart Sounddeck 100. The new quality level of the Canton Smart Sounddeck 100 model is due not only to the modern HDMI interface, built-in Chromecast media player and premium quality, but also to unique wireless capabilities, which allow you to complement it with any other wireless systems of the Smart series, implementing the 2.1.2 format.
Three equalizer presets on board the Canton Smart Sounddeck 100 provide easy audio adjustments to optimally tailor the sound deck to the three most common setups. At the touch of a button, Canton optimizes for mounting a freestanding Canton Smart Sounddeck 100 with a wall-mounted TV (EQ1), for mounting with a TV on a DM soundbar (EQ2), or for mounting a soundbar in a rack (EQ3). Bass, mids and treble can also be adjusted using the small remote control to optimize the sound to your liking.
Four thin 100mm woofers act as a subwoofer at the bottom of the cabinet. To provide stereo and surround sound, there are two 50mm mid-range drivers and a 19mm D’Appolito horizontal tweeter located on the left and right of the front panel.
The three-digit multifunction display lights up briefly each time a command is entered and allows you to control the front surround sound system. The display turns off during operation. To control your sound deck and TV with just one remote control, Canton Smart Sounddeck 100 can learn the infrared code of the TV remote control. The 2.1 Virtual Surround system offers a lip-sync function, can reduce volume differences when dynamic range compression is activated, or improve speech intelligibility using the tone function.
The auto on/off switch detects the presence of signals on the optical or coaxial digital input and automatically starts the Canton sound deck once the source device is turned on. After turning off the source, the Canton Smart Sounddeck 100 goes into standby mode after approximately 30 seconds. The Canton Smart Sounddeck 100 carries basic Dolby Digital and DTS decoders on board, and is acoustically configured as a triphonic. If the power or bass depth of the built-in subwoofer is not enough, you can connect an external subwoofer using the low-level output. Switching with the signal source is organized extremely simply: analog RCA, optical or coaxial inputs.
The Canton Smart Sounddeck 100 soundbar stand has dimensions of 100 x 6.95 x 33 cm, and is designed to accommodate a large diagonal TV (weighing up to 40 kg). If you’re looking for a TV speaker with style and great sound, you should check out the Canton Smart Sounddeck 100. It’s easy to use, looks better than the competition, and has class-leading sound quality.
Characteristics Canton Smart Sounddeck 100 gen 2
Frequency response 35 … 23.000 Hz
Crossover frequency 170 / 3.000 Hz
Woofer 4 x 100 mm (4 ”)
Midrange 2 x 50 mm (2 ”)
Tweeter 2 x 19 mm (1 ”), Fabric
Network interfaces: LAN, WiFi
HDMI switching (inputs/outputs): 3/1, support 4K HDR, ARC, CEC
Digital inputs: optical and coaxial
Analog input: 2RCA
Subwoofer output: RCA
Bluetooth interface: version 4.0 (apt-X)
Decoders: Dolby Digital, DTS
Control application: Google Home, built-in media player Chromecast
Maximum vertical load 40 kg.
Weight 12 kg
Platform dimensions (WxHxD): 100 x 6.95 x 33 cm.
Loading ...